Recently Updated Pages
Firmware Updates - Controller
Inevitably, with any system of this complexity, there will be bugs; ghosts in the machine - but a...
Firmware Updates - Receiver
In order to simplify the process of uploading firmware to the receiver as much as possible, we ha...
Receiver Settings (v1.1.0)
This page describes version 1.1.0 of the controller/receiver software. See the previous page for ...
Controller Settings
The final menu for programming is the controller screen. There are two options available here: ...
Receiver Settings
This page describes version 1.0.0 of the controller/receiver software. See the next page for v1.1...
Firmware links
The most recent firmware version appears at the top of this page (also on the Releases page). If ...
Release History
January 2026 Receiver: v1.0.0 Controller: v1.0.0 April 2026 Receiver: v1.1.0 : Click here t...
Factory Reset - Receiver
In the event you need to carry out a complete wipe of all settings in your receiver (e.g. you're ...
Factory Reset - Controller
You may find you need to clear your controller settings back to how you received it from us. To ...
Quick-start Guide
Thank you for purchasing a Bexhill West Turntable Controller! This quick-guide is intended to g...
Introduction
Welcome to the Bexhill West Turntable Controller user manual. If you haven't already purchased a ...
EMERGENCY! Stop...!
At any time during a turntable move, pressing the red "STOP" button will immediately halt the tur...
Rapid Moves
You may wish to quickly move your turntable into a new position. Perhaps the express is coming, a...
Quick Actions
As well as the "normal" movements we covered in the previous page, there are two "quick actions",...
Changing Roads
The Bexhill West Turntable has been designed to be as simple and as intuitive as possible to use....
Setting turntable speed and acceleration
To access the speed configuration menu, from the main programming menu, press the B key. The scr...
Adding, Modifying and Deleting Roads
To access the road programming menu, press the "A" button from the main programming menu. The scr...
Programming Mode
We assume you have already carried out the steps required to pair a receiver and controller, and ...
Introducing The Bexhill West Turntable Controller
The Bexhill West Turntable Controller is an advanced wireless control system for up to four fully...
Connecting your first receiver to the controller
Power On Switch the power on by pressing in the power switch on the right-hand side until it cli...