Programming your turntable
Add, modify and remove roads from your turntable; set the default road, change the track polarity.
Programming Mode
We assume you have already carried out the steps required to pair a receiver and controller, and ...
Adding, Modifying and Deleting Roads
To access the road programming menu, press the "A" button from the main programming menu. The scr...
Setting turntable speed and acceleration
To access the speed configuration menu, from the main programming menu, press the B key. The scr...
Receiver Settings
This page describes version 1.0.0 of the controller/receiver software. See the next page for v1.1...
Receiver Settings (v1.1.0)
This page describes version 1.1.0 of the controller/receiver software. See the previous page for ...
Controller Settings
The final menu for programming is the controller screen. There are two options available here: ...